CameraMetadata Class

A constructor used when creating managed representations of JNI objects; called by the runtime.

The camera device faces the front of the vehicle body frame.

The camera device faces the left side of the vehicle body frame.

The camera device faces the outside of the vehicle body frame but not exactly one of the exterior sides defined by this enum.

The camera device faces the rear of the vehicle body frame.

The camera device faces the right side of the vehicle body frame.

The camera device faces the inside of the vehicle body frame but not exactly one of seats described by this enum.

The camera device faces the center seat of the first row.

The camera device faces the left side seat of the first row.

The camera device faces the right seat of the first row.

The camera device faces the center seat of the second row.

The camera device faces the left side seat of the second row.

The camera device faces the right side seat of the second row.

The camera device faces the center seat of the third row.

The camera device faces the left side seat of the third row.

The camera device faces the right seat of the third row.

The camera device exists outside of the vehicle body frame and on its front side.

The camera device exists outside and on left side of the vehicle body frame.

The camera exists outside of the vehicle body frame but not exactly on one of the exterior locations this enum defines.

The camera device exists outside of the vehicle body frame and on its rear side.

The camera device exists outside and on right side of the vehicle body frame.

The camera device exists outside of the extra vehicle's body frame and on its front side.

The camera device exists outside and on left side of the extra vehicle body.

The camera device exists on an extra vehicle, such as the trailer, but not exactly on one of front, rear, left, or right side.

The camera device exists outside of the extra vehicle's body frame and on its rear side.

The camera device exists outside and on right side of the extra vehicle body.

The camera device exists inside of the vehicle cabin.

Scene change is detected within the AF region(s).

Scene change is not detected within the AF region(s).

Disable autoframing.

Enable autoframing to keep people in the frame's field of view.

Auto-framing has reached a stable state (frame/fov is not being adjusted).

Auto-framing is in process - either zooming in, zooming out or pan is taking place.

Auto-framing is inactive.

Bokeh effect must not slow down capture rate relative to sensor raw output, and the effect is applied to all processed streams no larger than the maximum streaming dimension.

High quality bokeh mode is enabled for all non-raw streams (including YUV, JPEG, and IMPLEMENTATION_DEFINED) when capture intent is STILL_CAPTURE.

Extended scene mode is disabled.

Use a specific extended scene mode.

No keys are applied sooner than the other keys when applying CaptureRequest settings to the camera device.

Zoom related keys are applied sooner than the other keys in the CaptureRequest.

Preview stabilization, where the preview in addition to all other non-RAW streams are stabilized with the same quality of stabilization, is enabled.

Lens distortion correction is applied without reducing frame rate relative to sensor output.

High-quality distortion correction is applied, at the cost of possibly reduced frame rate relative to sensor output.

No distortion correction is applied.

The value of CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation is relative to the origin of the automotive sensor coordinate system, which is at the center of the rear axle.

The value of CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation is relative to the position of the primary gyroscope of this Android device.

The value of CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation is relative to the optical center of the largest camera device facing the same direction as this camera.

The camera device cannot represent the values of CameraCharacteristics#LENS_POSE_TRANSLATION android.lens.poseTranslation and CameraCharacteristics#LENS_POSE_ROTATION android.lens.poseRotation accurately enough.

A software mechanism is used to synchronize between the physical cameras.

The camera device supports frame timestamp synchronization at the hardware level, and the timestamp of a physical stream image accurately reflects its start-of-exposure time.

The device supports querying the possible combinations of color spaces, image formats, and dynamic range profiles supported by the camera and requesting a particular color space for a session via android.hardware.camera2.params.SessionConfiguration#setColorSpace .

The device supports one or more 10-bit camera outputs according to the dynamic range profiles specified in android.hardware.camera2.params.DynamicRangeProfiles#getSupportedProfiles .

The camera device supports the OFFLINE_PROCESSING use case.

The device supports reprocessing from the RAW_SENSOR format with a bayer pattern given by CameraCharacteristics#SENSOR_INFO_BINNING_FACTOR android.sensor.info.binningFactor (m x n group of pixels with the same color filter) to a remosaiced regular bayer pattern.

The camera device supports selecting a per-stream use case via android.hardware.camera2.params.OutputConfiguration#setStreamUseCase so that the device can optimize camera pipeline parameters such as tuning, sensor mode, or ISP settings for a specific user scenario.

The camera device is only accessible by Android's system components and privileged applications.

This camera device is capable of producing ultra high resolution images in addition to the image sizes described in the CameraCharacteristics#SCALER_STREAM_CONFIGURATION_MAP android.scaler.streamConfigurationMap.

Cropped RAW stream when the client chooses to crop the field of view.

Default stream use case.

Live stream shown to the user.

One single stream used for combined purposes of preview, video, and still capture.

Still photo capture.

Long-running video call optimized for both power efficiency and video quality.

Recording video clips.

Processed images are rotated by 180 degrees.

Processed images are rotated by 270 degrees clockwise, and then cropped to the original aspect ratio.

Processed images are rotated by 90 degrees clockwise, and then cropped to the original aspect ratio.

The camera API automatically selects the best concrete value for rotate-and-crop based on the application's support for resizability and the current multi-window mode.

No rotate and crop is applied.

This is the default sensor pixel mode.

In this mode, sensors typically do not bin pixels, as a result can offer larger image sizes.

This camera device supports the onReadoutStarted callback as well as outputting readout timestamps.

This camera device doesn't support readout timestamp and onReadoutStarted callback.

Do not include OIS data in the capture result.

Include OIS data in the capture result.

Returns the runtime class of this Object.

The handle to the underlying Android instance.

Returns a list of the keys contained in this map.

This API supports the Mono for Android infrastructure and is not intended to be used directly from your code.

This API supports the Mono for Android infrastructure and is not intended to be used directly from your code.

Creates and returns a copy of this object.

Indicates whether some other object is "equal to" this one.

Returns a hash code value for the object.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.

Wakes up a single thread that is waiting on this object's monitor.

Wakes up all threads that are waiting on this object's monitor.

Sets the Handle property.

Returns a string representation of the object.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>, or until a certain amount of real time has elapsed.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>, or until a certain amount of real time has elapsed.

Performs an Android runtime-checked type conversion.